Replacement lamp bracket only - Rear - L/E versions (Silver)

About the mounting brackets (light not included):

The mounting bracket is the same for the light as the one used for the reflector. So if you are just replacing the reflector with the light, you don't need a new bracket (unless you want a more shiny one!)

If you don't have a rack - then you will need this "No rack" bracket. you should only need this bracket if:
a/ You have lost the bracket (which involves removing the brake caliper)
b/ You are removing your rack
c/ You have a very old Brompton with the older style mount and wish to fit a current Brompton rear light / reflector 

Dimensions: The distance between the two mount holes is 50mm - this corresponds to the screws used on the Spanninga / Brompton rear light / reflector

The 50mm spacing is also used by many other light manufacturers (e.g. bush and muller)